Telex MS2002 Manual de usuario descargar pdf (Pagina 13)

Figure 5 - MS-2002 typical Speaker Station and Belt Pack Connections.

Typically, a headset is connected to the front panel of the MS-2002, and the DIP switches are set to the monaural operation (default

setting) so that both intercom channels as heard in the monaural headphones (binaural headphone operation is not supported). Note

that belt packs use less power than speaker stations, and you can daisy-chain more of them on a signle cable run. Avoid very long

cable runs with daisy-chained speaker stations. This example shows how you would “home run” an SS2002 speaker station when

the cable is very long. Also, set the Combine/Isolate switch to the Isolate position. With this setting the 2 intercom channels are

completely separated.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Sin comentarios

Telex MS2002 Manual de usuario Pagina 13